Clutch B

DISASSEMBLY 

Fig 1: Clutch B Exploded View

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

1. Position the input/output shaft and the P4 annulus drum assembly (1) on Assembly, Press Fixture 8925-3

   (special tool #8925-3, Assembly, Press Fixture)

   Courtesy of CHRYSLER GROUP, LLC

   and Splitter, Bearing/Gear 1130

   (special tool #1130, Splitter, Bearing/Gear)

   Courtesy of CHRYSLER GROUP, LLC

   .

   Courtesy of CHRYSLER GROUP, LLC

2. Remove the selectable shim (1).

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the P1 (1) annulus from the assembly.

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the B-clutch wave plate (1).

   Courtesy of CHRYSLER GROUP, LLC

5. Remove the friction and steel plates (2).

   Courtesy of CHRYSLER GROUP, LLC

6. Remove the backing plate (1) from the assembly (2).

ASSEMBLY 

Courtesy of CHRYSLER GROUP, LLC

1. Position the input/output and the P4 annulus drum assembly on

   (special tool #8925-3, Assembly, Press Fixture)

   Courtesy of CHRYSLER GROUP, LLC

   and

   (special tool #1130, Splitter, Bearing/Gear)

   Courtesy of CHRYSLER GROUP, LLC

   .

   Courtesy of CHRYSLER GROUP, LLC

2. Install the backing plate (1) onto the input/output shaft.

   Courtesy of CHRYSLER GROUP, LLC

3. Install the friction and steel plates (2).

   Courtesy of CHRYSLER GROUP, LLC

4. Install the B-clutch wave plate (1).

   Courtesy of CHRYSLER GROUP, LLC

5. Install the P1 annulus onto the input/output shaft (1).

   Courtesy of CHRYSLER GROUP, LLC

6. Install the correct selectable shim (1) onto the P1 annulus.