Removal And Installation

REMOVAL 

1. Raise and support the vehicle.
2. Remove the engine belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION .
3. Remove the transmission belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, REAR, REMOVAL AND INSTALLATION or BELLY PAN, REAR SUSPENSION, REMOVAL AND INSTALLATION or BELLY PAN, SIDE, REMOVAL AND INSTALLATION .
4. Remove the RH and LH catalytic converters. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

5. Loosen the bands (2 and 3) and disconnect the coolant supply and return pipes (2 and 3) from the transmission fluid heat exchanger.

   Courtesy of CHRYSLER GROUP, LLC

6. Remove the transmission fluid heat exchanger bolts (2a), transmission fluid heat exchanger tube bolts (1a) and remove the transmission fluid heat exchanger (2b).

INSTALLATION 

Courtesy of CHRYSLER GROUP, LLC

1. Install the transmission fluid heat exchanger (2b), transmission fluid heat exchanger tube bolts (1a), the transmission fluid heat exchanger bolts (2a) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .

   Courtesy of CHRYSLER GROUP, LLC

2. Connect the coolant supply and return pipes (2 and 3) to the transmission fluid heat exchanger and tighten the bands (2 and 3).
3. Install the RH and LH catalytic converters. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATIONCONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .
4. Install the transmission belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, REAR, REMOVAL AND INSTALLATION or BELLY PAN, REAR SUSPENSION, REMOVAL AND INSTALLATION or BELLY PAN, SIDE, REMOVAL AND INSTALLATION .
5. Install the engine belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION .
6. Remove the support and lower the vehicle the vehicle.