High Beam Bulb

NOTE:

Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.

REMOVAL

Disconnect and isolate the negative battery cable.

Courtesy of CHRYSLER GROUP, LLC
Remove the rubber cover (1a) from the front lamp unit (1b).

Courtesy of CHRYSLER GROUP, LLC
1. Rotate the bulb socket (1a) in an counter-clockwise direction to remove it from the housing.
Disconnect the wire harness connector (2a) from the bulb socket.

INSTALLATION

NOTE:

Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.

Inspect the bulb, bulb socket and wire harness connector integrity.

Courtesy of CHRYSLER GROUP, LLC
Connect the wire harness connector (1a).
Align the bulb and socket assembly (1b) into the front lamp unit and rotate clockwise until properly installed.

Courtesy of CHRYSLER GROUP, LLC
Install the access cover (1a) to the front lamp unit (1b).
Connect the negative battery cable.