Removal And Installation: Installation
- Position the microphone (2a) near the headliner and connect the microphone wire harness connector (1a) to the headliner wire harness connector.
- Position the wire harness insulator (1b) over the wire harness connector.
- Feed the wire harness and connector into the headliner and engage the front retaining tab (2d) with the headliner.
- Engage the microphone retaining tabs (2b) with the headliner by pushing gently upward on the rear of the microphone (2a) until it is fully secured to the headliner.
- Connect the negative battery cable.