Removal And Installation: Installation
- Check that the windshield washer nozzle is not damaged. Clean it if necessary.
- Position the washer nozzle (3) to the underside of the hood and connect the washer solvent hose (2) to the windshield washer nozzle (3).
- Connect the wire harness connector (1) to the washer nozzle.
- Place the windshield washer nozzle (3) into the hood and press firmly to engage the retainers (1) and (2) fully.
- Install the washer nozzle cover (1).
- Connect the negative battery cable.
- Close the hood.
- Check that the windshield washer nozzle is working.
