Description And Operation: Description
The windshield wash/wipe system is activated by the lever located on the right of the steering wheel, with the following functions: there are various possible positions for the stalk to which the following functions correspond:
- Wiper off
- Rain sensor first sensitivity level
- Rain sensor second sensitivity level
- First continuous speed
- Second continuous speed
- MIST function (toggle position up): operation limited to the time for which the stalk is held in this position
The wiper (right) multifunction switch cannot be adjusted or repaired. If any function or feature of the switch is ineffective or if the switch is damaged, the entire Steering Column Control Module (SCCM) must be replaced. Refer to MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL AND INSTALLATION .
For additional information on the wiper (right) multifunction switch or other functions of the SCCM. Refer to MODULE, STEERING COLUMN CONTROL (SCCM), DESCRIPTION AND OPERATION .