Diagnostic Test

CHECK FOR AN ACTIVE DTC 

1. With the scan tool, read Powertrain Control Module (PCM) DTCs and Freeze Frame Data and record on the repair order.
2. Using the recorded Freeze Frame Data and the When Monitored and Set Conditions above, operate the vehicle in the conditions that set the DTC.
3. With the scan tool, read DTCs and record on the repair order.

   Is the DTC active or pending?

   Yes 

   • With the scan tool, perform the "Reset Fuel Rail Bleed" procedure.
   • Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .

   No 

   • Test complete.