Vapor Canister

REMOVAL 

1. Disconnect and isolate the negative battery cable.
2. Remove the left rear wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

3. Disconnect the quick connectors for the fuel vapor intake and outlet lines (1).
4. Disconnect the integrity control device sealing system for fuel vapors wire harness connector (2).
5. Remove the nuts (3a) and the fuel vapor canister (3b).

INSTALLATION 

1. Install the fuel vapor canister and securely tighten the nuts.
2. Connect the integrity control device sealing system for fuel vapors wire harness connector.
3. Connect the quick connectors for the fuel vapor intake and outlet lines.
4. Install the left rear wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL AND INSTALLATION .
5. Connect the negative battery cable.