Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

CHECK BATTERY CONNECTION
1. Check for loose, damaged or corroded connections on the battery.
  Are there any loose or damaged connections?
  
  Yes
  - Repair the wiring connections as necessary.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
  No
  - Go to 2.
CHECK BATTERY CHARGE
1. Check the battery charge using the Midtronics no. 2000037000 equipment.
  Is the Battery voltage low?
  
  Yes
  - Recharge or replace the battery.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
  No
  - End of diagnosis.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .