Turbocharger Cooling System Coolant Pump

REMOVAL 

1. Disconnect and isolate the negative battery cable.
2. Drain the turbocharger cooling system. Refer to DRAINING AND FILLING THE TURBOCHARGER COOLING SYSTEM  .
3. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

4. Loosen the clamp and remove inlet hose (1) from the coolant pump.

   Courtesy of CHRYSLER GROUP, LLC

5. Loosen the clamp and remove supply hoses (1) from the coolant pump.

   Courtesy of CHRYSLER GROUP, LLC

6. Disconnect the turbocharger coolant pump wire harness connector (1).
7. Remove the bolts (2a) and the turbocharger coolant pump (2b) with support bracket.

INSTALLATION 

1. Install the turbocharger coolant pump with bracket and securely tighten the bolts.
2. Connect the turbocharger coolant pump wire harness connector.
3. Install the supply hoses to the coolant pump and tighten the clamp.
4. Install the inlet hose to the coolant pump and tighten the clamp.
5. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
6. Fill the turbocharger cooling system. Refer to DRAINING AND FILLING THE TURBOCHARGER COOLING SYSTEM  .
7. Connect the negative battery cable.