LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L - Engine (Service Information) >> Valve Timing >> Guides, Timing Chain >> Removal And Installation >> Oil Pump Drive Chain Guide

Oil Pump Drive Chain Guide

REMOVAL 

  1. Remove the timing chain cover. Refer to COVER(S), ENGINE TIMING, REMOVAL AND INSTALLATION .
  2. Remove the cam chain. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL AND INSTALLATION .
  3. Remove the oil pump drive chain tensioner shoe. Refer to TENSIONER, ENGINE TIMING, REMOVAL AND INSTALLATION .
  4. Remove the oil pump drive chain. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL AND INSTALLATION .
    GC0181023Courtesy of CHRYSLER GROUP, LLC
  5. Remove the oil pump drive chain guide (2).

INSTALLATION 

  1. Remove all sealant residues.
    GC0181022Courtesy of CHRYSLER GROUP, LLC
  2. Check the correct timing of the engine crankshaft (1a): reference (1b) has to be at 6 o'clock as shown in the illustration (No. 1 cylinder piston at top-dead-center).
  3. Install the oil pump drive chain guide in position.
    GC0180974Courtesy of CHRYSLER GROUP, LLC
  4. Starting from the crankshaft sprocket, position the two painted chain links (1b) at the reference mark (1a).
    GC0181020Courtesy of CHRYSLER GROUP, LLC
  5. Position the balance shaft sprocket so the reference mark (1a) aligns with the painted chain link (1b).
    GC0181005Courtesy of CHRYSLER GROUP, LLC
  6. Position the engine oil pump sprocket so the reference mark (1a) aligns with the painted chain link (1b).
    GC0180973Courtesy of CHRYSLER GROUP, LLC
  7. Install the screws (1a) fastening the oil pump drive chain guide (1b) and tighten to the proper specification Refer to TORQUE SPECIFICATIONS  .
  8. Install the oil pump drive chain tensioner shoe. Refer to TENSIONER, ENGINE TIMING, REMOVAL AND INSTALLATION .
  9. Install the cam chain. Refer to CHAIN AND SPROCKETS, TIMING, REMOVAL AND INSTALLATION .
  10. Install the timing chain cover. Refer to COVER(S), ENGINE TIMING, REMOVAL AND INSTALLATION .
  11. If removed, install the oil filter and fill the engine crankcase with the proper oil to the correct level. Refer to OIL, STANDARD PROCEDURE .
  12. Run the engine until it reaches normal operating temperature. Check cooling system for correct fluid level. Refer to ADDING ADDITIONAL COOLANT .