LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Front HALFSHAFT >> Diagnosis And Testing >> Diagnosis And Testing - Half Shaft >> Clunking Noise During Acceleration

Clunking Noise During Acceleration

SYMPTOM POSSIBLE CAUSE REPAIR
Clunk or snap noise during launch or when shifting into drive or reverse gear.
  • Loose hub nut.
  • Damaged hub splines.
  • Replace hub nut.
  • Replace hub bearing and halfshaft.
Clunking noise at low speed.
  • Severely worn or damaged tripod or Constant Velocity (CV) joint.
  • Replace halfshaft.
Rattle or clunk over bumps. Grease is slung around the undercarriage.
  • Loss of lube in CV joint boots.
  • Replace halfshaft.
scientia non olet · About LEMON Manuals