LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Hub And Bearing >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the hub and bearing in place on the knuckle.
  2. Install the hub and bearing to knuckle mounting bolts and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Remove the rear knuckle. Refer to KNUCKLE, REAR, REMOVAL AND INSTALLATION .
  4. Remove the supports and lower the vehicle.
  5. Preform a wheel alignment. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals