Change Engine Oil Reminder Reset - Procedure 01

This vehicle is equipped with an automatic oil change indicator system. Based on engine operation conditions, the oil change indicator message will illuminate in the instrument cluster. The Wrench Warning Light appears in the cluster as a service reminder when vehicle maintenance is required, according to the scheduled maintenance mileage. The maintenance schedule intervals are set by the manufacturer.

NOTE: To reset the "Change Engine Oil" message, a scan tool can be used. See below for the manual reset procedure. To reset the "Wrench Warning" indicator light the use of a scan tool is required.

Without pressing the brake pedal, cycle the ignition to the MAR (ON-RUN) position (do not start the engine).
Press and release the accelerator pedal 3 times.

NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. If the above process fails to complete, use the scan tool to complete the reset process.