LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension & Wheel Alignment >> Front >> Sensor, Active Damping >> Removal And Installation >> Sensor, Body >> Removal

Sensor, Body: Removal

  1. Disconnect and isolate the negative battery cable.
    GC0198517Courtesy of CHRYSLER GROUP, LLC
  2. Remove the three retaining clips (2a) from the cover, and remove the cover (1a) from the vehicle.
    GC0195152Courtesy of CHRYSLER GROUP, LLC
  3. Remove the mounting bolt (1a) and remove the active damping sensor (1b) by disengaging its positioning pin from the respective hole on the body.
  4. Disconnect the active damping senor wire harness connector (2a).
  5. Remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals