LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Gear >> Tie Rod, Steering >> Removal And Installation >> Outer Tie Rod End >> Removal

Outer Tie Rod End: Removal

NOTE:

Installation process is the same for both sides of the vehicle.

NOTE:

When unscrewing the outer tie rod from inner, count the number of revolutions to take it off. This action will aid in installation, getting the toe close to where it needs to be when setting the wheel alignment.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
    GC0198737Courtesy of CHRYSLER GROUP, LLC
  3. Loosen the jam nut (3) to the outer tie rod end (2).
  4. Remove and DISCARD  the outer tie rod to knuckle mounting nut (1).
  5. Release the outer tie rod end from knuckle using remover, Special Tool (special tool #9360, Remover, Ball Joint).
    NOTE:

    Count how many rotations it takes to remove outer tie rod for installation reference.

  6. Remove the outer tie rod from the inner tie rod.
scientia non olet · About LEMON Manuals