Diagnostic Test

DETERMINE ACTIVE DTC
NOTE:
Make sure the battery is fully charged.
1. Turn the ignition on.
2. Wait 12 seconds, then with the scan tool, read all active ORC DTCs.
  Is B0126-54 CALIBRATION MISSING-MISSING CALIBRATION set?
  
  Yes
  - Go To 2
REPLACE THE ORC MODULE
Is B0126-54 Active?

Yes

WARNING:
If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to follow these instructions may result in possible serious or fatal injury.
- Replace the Occupant Restraint Controller (ORC) in accordance with Service Information. Refer to MODULE, OCCUPANT RESTRAINT CONTROL (ORC), REMOVAL AND INSTALLATION .
- Perform the RESTRAINTS SYSTEM VERIFICATION TEST. Refer to STANDARD PROCEDURE .