Diagnostic Test
- REAR RIGHT PRETENSIONER AND CHECK AIRBAG CONTROL UNIT CONNECTION
- Check for loose, damaged or corroded connections on the rear right pretensioner or the airbag control unit.
Are there any loose or damaged connections?
Yes
- Repair the wiring connections as necessary.
No
- Go to Step Refer to 2.
- Check for loose, damaged or corroded connections on the rear right pretensioner or the airbag control unit.
- REAR RIGHT PRETENSIONER AND AIRBAG CONTROL UNIT WIRING CHECK
- Check the wiring for an open circuit or high resistance from the rear right pretensioner and pins 25 and 26 of connector A on the airbag control unit.
Is there a high resistance or open condition in the wiring?
Yes
- Repair the open circuit or high resistance in the wiring.
No
- Go to Step Refer to 3.
- Check the wiring for an open circuit or high resistance from the rear right pretensioner and pins 25 and 26 of connector A on the airbag control unit.
- REAR RIGHT PRETENSIONER AND AIRBAG CONTROL UNIT WIRING CHECK
- Check the wiring for a short circuit from the rear right pretensioner and pins 25 and 26 of connector A on the airbag control unit.
Is there a short circuit in the wiring?
Yes
- Repair the short circuit in the wiring.
No
- Go to Step Refer to 4.
- Check the wiring for a short circuit from the rear right pretensioner and pins 25 and 26 of connector A on the airbag control unit.
- REAR RIGHT PRETENSIONER WIRING CHECK
- Turn the ignition key to the STOP position.
Is the error present?
Yes
- Turn the ignition key to the STOP position Replace the wiring.
No
- Go to Step Refer to 5.
- Turn the ignition key to the STOP position.
- REAR RIGHT PRETENSIONER OPERATION CHECK
- Turn the ignition key to the STOP position.
Is the error present?
Yes
- Turn the ignition key to the STOP position.
No
- End of diagnosis.
- Turn the ignition key to the STOP position.