LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Heating & Air Conditioning >> Distribution >> Motor, Blower >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0194626Courtesy of CHRYSLER GROUP, LLC
  1. Position the blower motor into the HVAC housing, and securely tighten the three screws (1b).
  2. Connect the blower motor wiring harness connector (2).
    GC0194061Courtesy of CHRYSLER GROUP, LLC
  3. Position the Body Control Module (BCM) access cover (1a), install and securely tighten the two cover screws (1a).
  4. Install the right front floor outlet duct. Refer to OUTLET, AIR, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals