LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> Dismounting/Mounting Procedures >> Tire Pressure Sensor >> Removal

Tire Pressure Sensor: Removal

  1. Remove the tire and wheel assembly. Deflate tire.
  2. Remove the tire bead with the valve pointing to 6 o'clock and work from 1 o'clock to 5 o'clock.
    NOTE: The distance between the blade of the hydraulic arm and the sensor must always be greater than 80 mm.
  3. Remove tire from wheel.
  4. Unscrew the sensor valve nut securing the sensor to the rim and remove it.
    NOTE: Always replace the nut every time it is refitted.
    NOTE: When the valve is removed from the rim, it is advisable to replace it because the rubber seal may not fit perfectly in the valve opening later on.
scientia non olet · About LEMON Manuals