Line Carrying Fuel Vapor From Activated Vapor Canister Outtake

REMOVAL 

1. Remove the left rear wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

2. Disconnect the quick connector (1) of the fuel vapor line outlet from the active vapor canister.

   Courtesy of CHRYSLER GROUP, LLC

3. Disconnect the quick connector (1) of the fuel vapor line outlet from the active vapor canister, intermediate pipe side.

   Courtesy of CHRYSLER GROUP, LLC

4. Open the clip (1a) and remove the fuel vapor line outlet from the active vapor canister inlet (1b).

INSTALLATION 

1. Install the triple fuel vapor line outlet to the active charcoal filter, close the retaining clips and connect the quick couplings.
2. Install the left rear wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL AND INSTALLATION .