Radiator Coolant Temperature Sensor

REMOVAL 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Disconnect and isolate the negative battery cable.
3. Remove the top engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
4. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
5. Drain the high temperature cooling system. Refer to DRAINING AND FILLING THE ENGINE COOLING SYSTEM  .

   Courtesy of CHRYSLER GROUP, LLC

6. Disconnect the radiator coolant temperature sensor wire harness connector (1).

   Courtesy of CHRYSLER GROUP, LLC

7. Remove the radiator coolant water temperature sensor (1).

INSTALLATION 

1. Install the radiator coolant temperature sensor and tighten it to the proper specification. Refer to TORQUE SPECIFICATIONS GAS ENGINE  .
2. Connect the radiator coolant temperature sensor wire harness connector.
3. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
4. Connect the negative battery cable.
5. Fill the engine cooling system. Refer to DRAINING AND FILLING THE ENGINE COOLING SYSTEM  .
6. Install the top engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
7. Remove the support and lower the vehicle.