LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Suspension & Wheel Alignment >> Front >> Sensor, Active Damping >> Removal And Installation >> Sensor, Body >> Installation

Sensor, Body: Installation

NOTE:

Use the diagnosis equipment to check that the system has not acquired errors during the operation.

GC0198337Courtesy of CHRYSLER GROUP, LLC
  1. Check that the sensor is not damaged.
  2. Connect the active damping sensor wire harness connector (1a).
  3. Position the sensor (1b), engaging its positioning pin in the respective hole on the body.
  4. Install the active damping sensor mounting bolt (2a) and tighten securely.
    GC0198517Courtesy of CHRYSLER GROUP, LLC
  5. Position the cover (1a) in place on the vehicle and install the three retainers (2a).
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals