LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Suspension & Wheel Alignment >> Front >> Link, Stabilizer Bar >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

NOTE:

Installation process is the same for both sides of the vehicle.

  1. Position the stabilizer bar link in position on the vehicle.
    GC0198549Courtesy of CHRYSLER GROUP, LLC
  2. Holding the stabilizer bar link stud stationary (1a) install a NEW  stabilizer bar link to stabilizer bar mounting nut (1b) and tighten to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
    GC0198415Courtesy of CHRYSLER GROUP, LLC
  3. Holding the stabilizer bar link stud (1a) stationary install a NEW  stabilizer bar link to strut assembly mounting nut (1b) and tighten to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
  4. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  5. Remove the supports and lower the vehicle.
scientia non olet · About LEMON Manuals