LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Base Brakes (Service Information) >> Hydraulic/Mechanical >> Reservoir, Brake Master Cylinder >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the brake fluid reservoir in place on the vehicle and install the brake fluid reservoir on the Anti-Lock Braking System ABS Module equipped with NEW  gaskets.
  2. Install the three brake fluid reservoir to ABS Module mounting screws and tighten securely.
  3. Connect the brake fluid level sensor electrical harness connector.
  4. Connect the two ABS Module electrically harness connectors.
  5. Fill the master cylinder reservoir to the proper level.
  6. Connect the negative battery cable.
  7. Bleed the base break hydraulic system. Refer to STANDARD PROCEDURE .
  8. Install the cowl panel. Refer to COVER, COWL PANEL, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals