LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Anti-Lock Brakes (Abs) (Service Information) >> Electrical >> Sensor, Wheel Speed, Front >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0198032Courtesy of CHRYSLER GROUP, LLC
  1. Position the front wheel speed sensor (1a) back in its housing, install and tighten the mounting screw (1b) to the proper and engage the wiring in the retaining brackets. Refer to TORQUE SPECIFICATIONS .
    GC0080272Courtesy of CHRYSLER GROUP, LLC
  2. Connect the electrical harness connector (1) for the right front wheel speed sensor and engage it in the retaining bracket.
  3. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Remove the supports and lower the vehicle.
scientia non olet · About LEMON Manuals