LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Anti-Lock Brakes (Abs) (Service Information) >> Electrical >> Sensor, Wheel Speed, Rear >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0197981Courtesy of CHRYSLER GROUP, LLC
  1. Position the wheel speed sensor (1a) in place in the knuckle.
  2. Install the wheel speed sensor to knuckle mounting bolt and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .
  3. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  4. Remove the supports and lower the vehicle.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals