Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Lower the glass down fully.
2. Remove channel (1a) in the area of the door pillar cover (1b).
3. Remove the screws (2a).
4. Remove the door pillar cover (1b), releasing is lower part (3a) from the channel (1a).

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. Position the door pillar cover (1).
2. Install and tighten the screws (2).
3. Install the channel in position (3).
4. Check the operation of the window by moving the window up and down and make sure the window does not bind.