Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Remove the wheel for the side being worked on. Refer to REMOVAL AND INSTALLATION .
2. Remove the screws (1a) and position aside the rear edge (1b) of the wheelhouse splash shield.
3. Remove the screw (2a) and nut (2b) and remove the wheel opening molding (2c).

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. Position the wheel opening molding (1a) and install the nut (1b) and the screw (1c).
2. Position the rear edge (2a) of the splash shield back and tighten the screws (2b).
3. Install the wheel for the side being worked on. Refer to REMOVAL AND INSTALLATION .