LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Body - Interior & Exterior >> Instrument Panel >> Panel, Silencer >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0197499Courtesy of CHRYSLER GROUP, LLC
  1. To install the LEFT silencer panel (1b), perform the following.
  2. Connect the wire harness connectors (3a and 3b).
  3. Locate the silencer panel and engage the clips (2a).
  4. Install screws in locations (1a).
    GC0197514Courtesy of CHRYSLER GROUP, LLC
  5. Install the LEFT floor console side panel (1a).
  6. Connect the negative battery terminal.
  7. To install the RIGHT silencer panel, perform the following.
    GC0198500Courtesy of CHRYSLER GROUP, LLC
  8. Position the RIGHT silencer panel to the instrument panel.
  9. Connect the wire harness connectors (3a and 3b).
  10. Install the silencer panel and engage the clips (2a and 2b) fully into the instrument panel.
  11. Install the screws at locations (1a) and tighten them securely.
  12. Install the RIGHT floor console side panel.
  13. Install the passenger side cowl trim panel. Refer to PANEL, COWL TRIM, REMOVAL AND INSTALLATION .
  14. Connect the negative battery terminal.
scientia non olet · About LEMON Manuals