LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Body - Interior & Exterior >> Doors - Rear >> Panel, Rear Door Trim, Upper >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

GC0198040Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the trim panel. Refer to PANEL, REAR DOOR TRIM, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, REFLECTOR, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, UPPER, REMOVAL AND INSTALLATION .
  3. Unseat and remove the upper lining (1a).
GC0197590Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

  1. Position the upper lining (1a) and engage it in its seat.
  2. Engage its ends (2a) and (2b) on the perimeter seal.
  3. Install the trim panel. Refer to PANEL, REAR DOOR TRIM, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, REFLECTOR, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, UPPER, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals