Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

Route the seat belt (3b) through the seat cushion and install the lower seat belt anchor bolts (3a). Refer to TECHNICAL SPECIFICATIONS .
If equipped with heated seat, connect the wire harness connector (2a).
Position the brackets (1b) to the floor brackets (1c) and push the rear seat cushion (1a) rearward to engage.

Courtesy of CHRYSLER GROUP, LLC
Make sure the seat belt tags (2) are positioned properly.
Make sure the buckles (3a) are routed through the cushion properly.
Working on each side of the seat, locate the rear seat cushion hooks (1b) to the captures (1c) and push down firmly to engage.
If equipped, attach the center seat belt buckle (4a).