Removal-Front Floor Carpet
NOTE:
The front floor carpet consists of two components, one for the driver side and one for the passenger side. These carpets can be removed and installed separately.
- Remove the driver or passenger front seat from the vehicle as necessary. Refer to SEAT, FRONT, REMOVAL AND INSTALLATION .
- If removing the left front carpet, remove the accelerator pedal. Refer to PEDAL, ACCELERATOR, REMOVAL AND INSTALLATION, 2.0LPEDAL, ACCELERATOR, REMOVAL AND INSTALLATION, 2.8L .
- Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION .
- Remove the cowl side trim panel. Refer to PANEL, COWL TRIM, REMOVAL AND INSTALLATION .
- If removing right front carpet remove the fasteners (1a) securing the BCM access cover and remove the access cover (1b) by releasing it from the lower side.
- Remove the front floor carpet (1a) from under the lower B-pillar trim panel (1b).
- Lift the front floor carpet at the rear and remove.

