Removal - Right Side

Courtesy of CHRYSLER GROUP, LLC

1. Remove the cowl panel cover Refer to COVER, COWL PANEL, REMOVAL AND INSTALLATION .
2. Remove the nuts (1) to release the positive jump terminal and position it aside.
3. Release the bolt (2) from the engine coolant reservoir.
4. Remove the bolts (3) and remove the brace (4) from vehicle.

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. Position the brace (4) and tighten the bolts (3) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
2. Position the positive wire harness jumper onto the support. Install the nuts (1) and tighten securely.
3. Install the bolt (2) that retainers the inner side of the engine coolant reservoir and tighten securely.
4. Install the cowl panel cover Refer to COVER, COWL PANEL, REMOVAL AND INSTALLATION .