Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

Remove the instrument panel cover. Refer to COVER, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
Disconnect the wire harness connector (1a) from the airbag control module (1b).
Remove the nut and loosen the ground strap (2a).
Release the wire harness retainers (3a) and separate the wiring harness (3b) from the body.

Courtesy of CHRYSLER GROUP, LLC
On the left side of vehicle, disconnect the wire harness connectors (1a, 1b, 1c and 1d).

Courtesy of CHRYSLER GROUP, LLC
Remove the nuts (1a and 1b), then lower the steering column (1c) in the vehicle.

Courtesy of CHRYSLER GROUP, LLC
Disconnect the wire harness connectors (1a) from the steering wheel lock module (1b).

Courtesy of CHRYSLER GROUP, LLC
Remove the nuts (1a) that secure the air conditioning case (1b).

Courtesy of CHRYSLER GROUP, LLC
Remove the nut (1a) and the loosen the bolts (2a).
Remove the wiper arms and cowl cover panel. Refer to COVER, COWL PANEL, REMOVAL AND INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC
In the engine compartment, remove the bolts (1b).

Courtesy of CHRYSLER GROUP, LLC
On the right side of vehicle, remove the nut and the ground strap (2c).
Disconnect the wire harness connectors (2a, 2b and 2c).
Disconnect the wire harness connectors (1a and 1b) from the body control module.

Courtesy of CHRYSLER GROUP, LLC
Remove the bolts (1a and 2a) and remove the instrument panel brackets (3a).

Courtesy of CHRYSLER GROUP, LLC
Remove the nut (1a).
Loosen the bolts (2a).

Courtesy of CHRYSLER GROUP, LLC
With the help of an assistant, one person on each side of the vehicle, remove the bolts (1a) from both ends of the instrument panel carrier (1b).
Carefully roll the instrument panel carrier slightly rearward to make sure there is nothing attached, then remove.