LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Body - Interior & Exterior >> Interior >> Console, Floor >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0198489Courtesy of CHRYSLER GROUP, LLC
  1. Position the floor console (1) into the vehicle, locating the front pins into the instrument panel.
    GC0197691Courtesy of CHRYSLER GROUP, LLC
  2. Lift the rear and connect the wire harness connectors (1a, 1b and 1c).
    GC0198079Courtesy of CHRYSLER GROUP, LLC
  3. Install the bolts (1a) and tighten securely. Install the bolt covers.
  4. Connect the wire harness connector (2a).
  5. Install the two screws at the front of the floor console.
    GC0198533Courtesy of CHRYSLER GROUP, LLC
  6. Connect the wire harness connector (1) and install the floor console rear cover (2a).
    GC0198080Courtesy of CHRYSLER GROUP, LLC
  7. Install the cover (1a).
    GC0198413Courtesy of CHRYSLER GROUP, LLC
  8. Install the floor console front side covers (1a).
  9. Install the gearshift knob. Refer to KNOB, GEARSHIFT, REMOVAL AND INSTALLATION, 8HP50/850REKNOB, GEARSHIFT, REMOVAL AND INSTALLATION, 8HP75 .
scientia non olet · About LEMON Manuals