LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Body - Interior & Exterior >> Seats, First Row >> Seat, Front >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0193642Courtesy of CHRYSLER GROUP, LLC
NOTE:

When installing the seat, it must be fastened without distorting the seat tracks. It is very important to loosely install all the bolts and tighten in the order as shown in illustration.

  1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, FIRST ROW, WARNING .
  2. Before installing the seat into the vehicle, check that the rearward floating nuts (1a) and front external nut (1b) move freely.
    GC0195091Courtesy of CHRYSLER GROUP, LLC
  3. Position the front seat (4) into the vehicle.
  4. Connect the wire harness connector (3a).
  5. Loosely install the front seat bolts (1a).
  6. Connect the negative battery cable and move the front seat to the full forward position.
    GC0194162Courtesy of CHRYSLER GROUP, LLC
  7. Loosely install the rear seat bolts (1a).
    GC0193868Courtesy of CHRYSLER GROUP, LLC
  8. Tighten the front seat bolts in sequence of (1a-front inner), (1b-rear inner), (1c-rear outer), then (1d-front outer) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  9. Install the headrest.
  10. Perform the SRS verification test. Refer to STANDARD PROCEDURE .
  11. Verify seat operation.
scientia non olet · About LEMON Manuals