LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Body - Interior & Exterior >> Seats, First Row >> Support, Lumbar >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0193443Courtesy of CHRYSLER GROUP, LLC
  1. Inspect the lumbar adjustment motor and spring integrity.
  2. Position the lumbar adjustment motor with the spring (1) to the seat.
  3. Install the spring hooks (2a) to the seat back frame.
  4. Using a NEW strap (3a) to fasten the lumbar adjustment motor.
  5. Connect the wiring harness connector (4a) to the lumbar adjustment motor.
  6. Install the seat air bag. Refer to AIR BAG, SEAT, REMOVAL AND INSTALLATION .
  7. Install the front seat back cover and cushion assembly. Refer to COVER, SEAT BACK, FRONT, REMOVAL AND INSTALLATION .
  8. Do not connect the negative battery cable at this time. The Supplemental Restraint System (SRS) Verification Test procedure should be performed following service of any SRS component. Refer to STANDARD PROCEDURE .
  9. Connect the negative battery cable.
scientia non olet · About LEMON Manuals