Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Open the door and remove the bolts (1).
2. Remove the striker (2).

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. Position the striker (1).
2. Install the bolts (2) without tightening them.
3. Move the striker (1) into the correct position, using the slotted openings in the bolts. The arrows indicate the possible movements for the adjustment.
4. Tighten the bolts to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
5. Check that the striker and the door latch are correctly matched and that the alignment is correct with the door closed.