Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove the applique. Refer to APPLIQUE, REMOVAL AND INSTALLATION .
3. Remove the window motor. Refer to MOTOR, WINDOW REGULATOR, REMOVAL AND INSTALLATION .
4. Release the covers (1a) of the carrier plate openings (1b).
5. Manually lift the glass, until the screws (2a) fastening the lift plates, are at the openings (1b).
6. Loosen the screws (2a), releasing the glass from the lift plates.

   Courtesy of CHRYSLER GROUP, LLC

7. Manually lift the glass (1a) with care and remove it from the outside of the door, after releasing it from the rear channel (1b).

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. Manually insert the glass (1a) in position with care from the outside of the door, engaging it with the rear channel (1b).

   Courtesy of CHRYSLER GROUP, LLC

2. Engage the glass with the lift plates, then tighten the screws (1a).
3. Engage the covers (2a) on the carrier plate openings (2b).
4. Install the window motor. Refer to MOTOR, WINDOW REGULATOR, REMOVAL AND INSTALLATION .
5. Install the applique. Refer to APPLIQUE, REMOVAL AND INSTALLATION .
6. Connect the negative battery cable.