LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Body - Interior & Exterior >> Doors - Rear >> Molding, Door Belt, Inner >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

GC0198235Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the trim panel. Refer to PANEL, REAR DOOR TRIM, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, REFLECTOR, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, UPPER, REMOVAL AND INSTALLATION .
  3. Release the inner belt molding (1a) from its seat (1b) on the door trim panel (1c).
GC0198479Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

  1. Position the inner belt molding (1a) and engage it in its seat (1b) on the door trim panel (1c).
  2. Install the trim panel. Refer to PANEL, REAR DOOR TRIM, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, REFLECTOR, REMOVAL AND INSTALLATION  Refer to, PANEL, REAR DOOR TRIM, UPPER, REMOVAL AND INSTALLATION .
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals