Removal - Front Half

Courtesy of CHRYSLER GROUP, LLC

1. Remove the wheel. Refer to REMOVAL AND INSTALLATION .
2. Remove the splash shield (1b) screws (1a).
3. Remove the nuts (2a).
4. Remove the push pin fastener (3a) using a trim stick or equivalent.
5. Remove the splash shield (1b), releasing it from its housing.

INSTALLATION

1. Place the splash shield in position.
2. Install the push pin fastener.
3. Tighten the splash shield screws and nuts.
4. Install the wheel. Refer to REMOVAL AND INSTALLATION .