LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Body - Interior & Exterior >> Interior >> Panel, Rear Shelf >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the rear seat back. Refer to SEAT BACK, REAR, REMOVAL AND INSTALLATION .
    GC0198773Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fasteners (1) and remove the rear shelf trim panel bezel (2).
    GC0198811Courtesy of CHRYSLER GROUP, LLC
  4. Remove the screws (1).
  5. Lift the front of the rear shelf panel (2) to release the retaining clips.
  6. Pull the rear shelf panel forward to disengage the retaining hook at the rear, then lift off.
  7. Pull the rear shelf panel down and disconnect the wire harness connectors, then remove.
scientia non olet · About LEMON Manuals