Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

Before installing, connect the wire harness connectors to the backside of the rear shelf panel (1b).
Position the rear shelf panel on the rear shelf, then push rearward to engage the retaining hook.
Locate the front retaining clips and hand tap to engage.
Install the screws (1a) and tighten securely.

Courtesy of CHRYSLER GROUP, LLC
Position the rear shelf trim panel bezel (2) to the rear shelf and install the fasteners (1).
Install the rear seat back. Refer to SEAT BACK, REAR, REMOVAL AND INSTALLATION .
Connect the negative battery cable.