Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Release the rubber cover (1a) on the rear side of the door.
2. Turn the internal screws (2a) counter-clockwise until the mounting (2b) for the exterior handle key barrel is released.

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the mounting with the key barrel (1a), initially also moving the handle (1b) to release the part (1c) from its seat (1d).

   Courtesy of CHRYSLER GROUP, LLC

4. If necessary, release the two opposing retainers (1a) and remove the trim (1b).

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION

1. If removed, place the trim (1a) in position and engage the opposing retainers (1b).

   Courtesy of CHRYSLER GROUP, LLC

2. Insert the mounting with the key barrel (1a) in the door, engaging the part (1b) in the handle seat (1c) and the end (1d) in its seat on the lock.
3. Tighten the internal screw (1a) fixing the key barrel mounting (1b).

   Courtesy of CHRYSLER GROUP, LLC

4. Secure the rubber cover.