Removal And Installation: Removal

CAUTION:

Do not use any type of pliers on the machined surface of the gas prop to assist in supporting the hood or decklid. Use a proper device for support, or the help of an assistant.

Courtesy of CHRYSLER GROUP, LLC

Remove the cowl panel cover. Refer to COVER, COWL PANEL, REMOVAL AND INSTALLATION .
Open and support the hood with a suitable prop or block.
Using a grease pencil or equivalent, mark the position of the hood hinge to aid in installation.

Courtesy of CHRYSLER GROUP, LLC
Remove the hood hinge nuts (2a).

Courtesy of CHRYSLER GROUP, LLC
Using a small flat bladed tool (1a), or equivalent, release the retaining clip (1b) while pulling the ball socket (1c) away from the ball stud.

Courtesy of CHRYSLER GROUP, LLC
Remove the hood hinge bolts (1a) and hood hinge from the body.