LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Body - Interior & Exterior >> Hood >> Latch, Hood >> Removal And Installation >> Primary Hood Release Cable >> Removal-Left Latch

Removal-Left Latch

GC0198502Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery terminal.
  2. Remove the push fasteners (1a) and the cover (2a), that covers the left hood latch.
  3. Remove the left front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
    GC0197867Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the wire harness connector (1a).
  5. Release the cable retainer (2a), then remove the cable end (2b).
  6. Position the cable (2c) aside.
    GC0198442Courtesy of CHRYSLER GROUP, LLC
  7. Using a grease pencil or equivalent, mark the position of the hood latch (1b) to aid in installation.
  8. Remove the two bolts (1a) and the hood latch.
scientia non olet · About LEMON Manuals