LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Alfa Romeo >> 2019 >> Giulia Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Hood >> Cable, Hood Release >> Removal And Installation >> Secondary >> Removal

Removal And Installation: Secondary: Removal

NOTE:

Take note of the cable routing for correct installation.

GC0198054Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery terminal.
  2. Remove the push fasteners (1a) and the cover (2a).
    GC0198502Courtesy of CHRYSLER GROUP, LLC
  3. Remove the push fasteners (1a) and the cover (2a), that covers the right  hood latch.
    GC0198521Courtesy of CHRYSLER GROUP, LLC
  4. Remove the screws (1a) and the push fasteners (2a).
    GC0198175Courtesy of CHRYSLER GROUP, LLC
  5. working on both sides of the vehicle, loosen the upper side retainers (1b) of the front fascia (1a)
    GC0197623Courtesy of CHRYSLER GROUP, LLC
  6. Release the cable retainer (1b), then remove the cable end (1c) from the right hood latch (1a).
  7. Position the cable (1d) aside.
  8. Release the cable retainer (2b), then remove the cable end (2c) from the safety latch (2a).
  9. Lift the front fascia (3a) and unclip the safety latch cable (3b) from the body.
  10. Remove the safety latch cable from the vehicle.
scientia non olet · About LEMON Manuals