Removal - Handle Bell Crank

Courtesy of CHRYSLER GROUP, LLC

1. Remove the cowl trim panel. Refer to PANEL, COWL TRIM, REMOVAL AND INSTALLATION .
2. Release the cable housing (1a), then the cable end (1b) of the control cable (1c).
3. Remove the screws (2a) and remove the bell crank (2b).

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION - HANDLE BELL CRANK

1. Position the bell crank (1a) and install the screws (1b).
2. Connect the cable end (2a), then the cable housing (2b) of the control cable (2c).
3. Install the cowl trim panel. Refer to PANEL, COWL TRIM, REMOVAL AND INSTALLATION .