Removal And Installation - Instrument Panel End Speaker - Tweeter: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the A-pillar trim panel. Refer to PANEL, A-PILLAR TRIM, REMOVAL AND INSTALLATION
.
- Using a suitable tool, remove the instrument panel speaker grill (1a), by releasing the integral latches (1b).
- Disconnect the wire harness connector (2) and remove the tweeter (1a).
- Remove the tweeter (1b) from the speaker grill (1c), by releasing the three inner retainers (1a).
